Cuts Cooling Costs
Bright white reflective finishes drop rooftop temperatures dramatically, easing the load on HVAC equipment all summer.
Roofing Services
Roof Coatings
The right roof, restored at the right time, can skip an entire replacement cycle. Coatings buy years of watertight service for a fraction of tear-off cost.
Roof Coatings
Restore It — Don't Replace It (Yet)
A fluid-applied coating turns an aging-but-sound roof into a seamless, reflective, watertight membrane. Because the existing roof stays in place, there’s no tear-off, no landfill fees, minimal disruption, and a project cost dramatically below replacement.
Coatings are not a patch for a failed roof — and we’ll tell you honestly if yours doesn’t qualify. The ideal candidate is a dry, structurally sound roof nearing the end of its service life. We verify with an inspection (and moisture scanning when needed) before we ever quote a coating.
Scope Of Work
Coating Systems We Install
- Silicone coating systems
- Acrylic coating systems
- Metal roof restoration & rust-proofing
- Single-ply & mod-bit restoration
- Seam & fastener reinforcement
- Reflective 'cool roof' finishes
- Ponding-water-resistant silicone
- Renewable warranty programs
Why Miller
What You Get With Us
Seamless Protection
Fluid-applied systems cure into one monolithic membrane — no seams, the most common failure point on aging roofs.
Fraction of Replacement Cost
Restoration typically runs well below the cost of tear-off and replacement, and can often be treated as maintenance.
Common Questions
Straight Answers
It needs to be structurally sound and dry. We inspect seams, flashings, and insulation, and check for trapped moisture. Roofs with widespread saturation or deck damage need repair or replacement first — and we’ll show you exactly what we found.
Typical systems add 10 to 20 years depending on the product and thickness applied, and many can be re-coated at the end of that cycle — turning your roof into a renewable asset.
Silicone excels where water ponds and offers the best UV stability. Acrylic is cost-effective on sloped metal with good drainage. We match the chemistry to your roof, not the other way around.
